The “There was a problem resetting your PC, no modifications were made” error occurs frequently when individuals try to reset their computer. Several remedies are available when Windows is reset, and these patches can be used to quickly fix any mistake.
Windows 10 includes a reset feature that allows users to wipe their PC clean. As a result, their Windows will revert to its factory default settings.
There’s no better solution than resetting the system to fix the issues than installing new Windows. To put it another way, resetting is a quicker and more efficient method of doing so. To this far, we’ve just talked about the advantages of a clean install.
Using the built-in function, we can reset our own computer. “There was a difficulty restarting your PC” appears as a warning when this option doesn’t perform as expected. As a result, you will be unable to use Windows even after a restart. As a result, we’ll be talking about some of the issues that might be causing this today.
Read Also:
- Roblox Error Code 279
- Kernel Security Check Failure Windows 10
- How To Transfer Windows to Another Drive?
This Error Occurred When You Tried To Reset Your Computer
We need to discover out the fundamental cause of the problem before drawing judgments. There are a number of possible causes for this, some of which are listed below. Look at the root reasons immediately.
- The PC you purchased was pre-installed with Windows 10 and was not updated from an earlier version of the operating system.
- Because of the compression method, the PC designer was able to reduce the amount of disc space needed to store the previously installed apps.
- You’ve made your own USB recovery disc.
- A USB recovery device booted your computer, and you may have chosen to reset this pc so that you may delete any options.
A Step-by-Step Guide Problems with Windows 10’s “Reset Your PC” feature
Even if you’ve successfully reinstalled Windows, you may still be unable to boot into it because of the notification that there was a problem with the resetting of your computer. Let’s have a look at some of the possible solutions to this issue.
1. Run the Startup/Automatic Repair
Step 1: Insert the Windows bootable DVD and restart your computer. You will then be asked to select a boot key, and then press a key to continue.
Step 2: Afterward, you’ll need to select a language that works best for you. The next step is to select the choice to repair. The troubleshooting option is the next step.
Step 3: Using the dialogue box, select the advanced option. Select either automatic or starting repair in step six. Awaiting the end of the procedure is step seven.
Step 4: Check to see if your computer is working properly by performing a fresh restart. Repairing the boot image and rebuilding the boot configuration data
Step 5: Go to the command prompt and select “Advanced Options” in order to get to this step. Codes 2 and 3 should be entered sequentially, pressing Enter after each line.
RebuildBcd bootrec.exe /FixMbr bootrec.exe /FixBoot bootrec.exe
Step 6: If the above-mentioned code fails, don’t be alarmed. To see if they work, try these:
/export bcdedit C:\BCD Backup
c: bcd -s -h -r ren cd boot attrib /RebuildBcd c:bootbcd bcd.old bootrec
Step 7: After you exit the command prompt, restart your computer to see if the problem has been fixed. We’ve got a few more options in the works, but this one works the best for now.
2. System File Checker and a Disk Check
Step 1: First, open the command prompt as we did earlier. The next step is to type the command on the command prompt and press Enter after each line of text.
sfc/scannow/offbootdir=c:\/offwindir=c:\
Windows
C:/f /r /x chkdsk c:/f
Just make certain that Windows recognises the drive you intend to use.
Step 2: To see whether the problem persists, try restarting your computer.
3. System Restore
Step 1: To begin, insert the Windows installation DVD and choose your preferred language from the drop-down menu. Secondly, select “repair computer from the bottom” as an option to fix your computer.
Step 2: Next, you must select the troubleshooting and advanced options options, respectively. From there, select System Restore and follow the on-screen directions. Check to see whether the problem has been fixed by restarting your computer.
Step 3: Change the name of registry keys for both operating systems and software. Start by opening the advanced settings in the cmd. Code must be entered one by one, pressing Enter after each command, in order to complete step two per cent of windir per cent of system32 per cent of configuration
To return to the Windows recovery environment, simply close the command prompt window. Choosing to proceed with Windows booting should fix the there was a difficulty resetting your PC issue, as shown in Step 4.
4. Drive Data Recovery
As a precaution, this procedure can potentially delete your personal files, so only use it when you’re sure in your abilities.
Step 1: Restart your computer by putting the USB recovery drive in and plugging it in. This is the second step, which requires you to push a key.
Step 2: Select your preferred language and click on the “next” button. Next, select the bottom left option to fix your computer. To begin troubleshooting, click Troubleshooting, then select Advanced Troubleshooting.
Step 3: Alternatively, you can use the system image recovery option in the advanced settings window. You’ll be able to complete the work if you follow the instructions on the screen.
Step 4: Using a Recovery USB, you may restore your computer. Make sure your USB recovery drive is plugged into the computer. Open the advanced options panel in cmd once more.
Step 5: Next, type notepad into the command and hit enter. The next step is to right-click on the file and select open in Notepad. Finally, you must move all of your files onto a new USB drive that you will use to start your computer.
Step 6: Once you know the drive, type it in and then press enter.
Step 7: After writing setup, press the enter key.
A new Windows installation window will open, and you only need to follow the on-screen directions to complete the process.
5. Repair and Reinstall
Your HDD may be to blame if you’ve tried all of the above-mentioned fixes and still can’t get your computer to work. It’s possible that the hard drive has been deleted. As a result, your only option is to download and install a fresh copy of Windows.
Read Also:
Conclusion
Windows 10/8.1/8 Error: There Was a Problem Resetting Your PC. We’ve examined all of the possible fixes. We sincerely hope that you have gained some new knowledge from this article. Please get in touch with us if you have any other ideas or methods for resolving this issue.
